Re: Step drill bit

In Reply to: Re: Step drill bit posted by Larry (TX) on January 19, 2017 at 12:45:58:

I could blow the hole myself but need a better hole than that. The hole in the current piece is egged out. That is why I'm replacing the piece.

Yes I would like to find a step drill bit which was 1 1/4 inch but have not done so to date. What is the typical horizontal distance between steps?

Were I at the farm I would go to a fabrication shop where they would punch-press the hole for me.

Thanks,

Jack

Follow Ups:

• Re: Step drill bit - Larry (TX) 12:51:03 01/21/17 (2)
  • Re: Step drill bit - Jack - Iowa 13:01:38 01/21/17 (1)
    • Re: Step drill bit - Larry (TX) 22:30:15 01/21/17 (0)

Name   : 
E-Mail : 
Subject: 

Message:

To add a single image to your post,  click here.
To add multiple images to your post, click here.

Optional Link URL : ←http://www.yourwebsite.com
Link Title        : ←Website Title
Optional Image URL: ←http://www.myimages.com/mypic.jpg

Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!