Re: thread chasers 2

In Reply to: thread chasers 2 posted by dave#1 on January 27, 2016 at 07:45:04:

That is a wild looking coil pack. Could not figure what that was at first.
How in the world do you get those in there with only 2" of clearance, and how in the world did the spark plug back out with that on top of it. Weird.
So how did the chaser work? How do you keep little metal filings from getting in the cylinder? And how do you get it started straight and in the right threads? Is it like starting a bolt, you turn it backwards slowly till it sets in the threads, then turn forward slowly and monitor the resistance? Curious minds want to know...
Thanks for the info...

Follow Ups:

• Re: thread chasers 2 - dave#1 18:11:37 01/27/16 (1)
  • Re: thread chasers 2 - SteveVA 20:52:09 01/27/16 (0)

Name   : 
E-Mail : 
Subject: 

Message:

To add a single image to your post,  click here.
To add multiple images to your post, click here.

Optional Link URL : ←http://www.yourwebsite.com
Link Title        : ←Website Title
Optional Image URL: ←http://www.myimages.com/mypic.jpg

Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!