In Reply to: Re: More playing in the snow posted by Zack(NC) on December 16, 2013 at 21:55:37:
I cobbled up a grapple for the loader bucket to help move brush. It started life as an old manure bucket. The tines were severely corroded, so I replaced with 3 bail spears and a couple smaller tines. The arm was bought online since I'm not that good of a fabricator. The base is welded to the bucket but can be removed with two pins (and the cylinder pin). It works really well for my needs since I cut a lot of trees, but does require a third spool valve.
More pics of the grapple:
Needs reinforcement after lifting too many heavy logs
Works for brush
Or for tearing down rotten garages
-John
Posting not permitted in the forum archives.<1387248343">