Re: 19-29 19-65 rear loader

In Reply to: Re: 19-29 19-65 rear loader posted by Brian's, NE on January 03, 2020 at 13:39:13:

Brian,
If you look at the "Loaders 1952 Parts Manual" in the website manuals tab, on page 41, it will show the pan installed over the tines.
The bottom edges are not welded, but a one piece bent at a 90 degrees.
There is an extra wear edge welded on the work end of it which is about 2" wide.
It gives a good view of the installation.
only two bolts, one on each side, and the welded on loops attach it to the tines/loader.
Do you have the accessory hydraulic boost parts for it as well?
Bob

Follow Ups:

• Re: 19-29 19-65 rear loader - BrianS, NE 15:03:27 01/04/20 (0)

Name   : 
E-Mail : 
Subject: 

Message:

To add a single image to your post,  click here.
To add multiple images to your post, click here.

Optional Link URL : ←http://www.yourwebsite.com
Link Title        : ←Website Title
Optional Image URL: ←http://www.myimages.com/mypic.jpg

Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!