Re: Painting PTO pulleys

[ Follow Ups ] [ Post Followup ] [ Implements Forum ] [ FAQ ]

Posted by Gary Ostby on August 16, 2016 at 11:04:00 [URL] [DELETE] :

In Reply to: Re: Painting PTO pulleys posted by Ed Gooding (VA) on August 14, 2016 at 15:11:40:

I have a couple of pics I took this morning. Both are 1 1/8" outputs. The gray goes to a 2N Ford and attached cordwood saw that's painted gray.The red pto goes to a 641 Ford with a 1 3/8" pto so I had to get the reducer shaft and an extension. Both require a bracket that attaches to the pto and saw as the saws don't use a normal toplink.


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ Implements Forum ] [ FAQ ]