Re: Carb ID help

[ N History Forum ] [ FAQ ]

Posted by 8N'r--WI on February 05, 2009 at 05:03:05 [URL] [DELETE] :

In Reply to: Re: Carb ID help posted by Tim Daley (MI) on February 05, 2009 at 05:02:42:

Tim---I just got home and looked to see if there is any kind of tag on the "paddle" and there wasn't. Without taking the carb off, the only marking on that carb are the ones you see in the picture.

The paddle does have the little screw in it that I am guessing held the tag that could have been on it. There is definitely nothing stamped in the metal at that spot either.

There are a few other things on this 49N that I cannot seem to figure on either. The axle on the right side does not have any slots in it for the axle nut clip to slip in either. It takes a regular size 2" nut, so it could not have been reground and re-threaded to a smaller size. The other side is normal. There is no dirt, crud that filled it either, because I took the paint off during the refurbishing process and it is a solid axle.

Thanks, Tim



Follow Ups:


Subject:

Posting not permitted in the forum archives.


[ N History Forum ] [ FAQ ]