Re: Bearings

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by Tim Daley(MI) on August 24, 2020 at 15:49:26 [URL] [DELETE] :

In Reply to: Bearings posted by Chad on August 24, 2020 at 14:18:26:

Ford used TIMKEN almost exclusively for all bearings, cones, and races. There was not anything fancy and all were just standard production parts. The Ford/Dearborn Plows MPC only lists the Ford part numbers and you aren't going to find any Ford/Dearborn parts anywhere anyway. So, you can take an old one and measure it, then look online (see below) for a match or take to your local Motion Industries dealer and have them decipher the sizes and what you need. Get the MPC from our MANUALS forum see LINK - take a copy of the MPC with you, look on Page 66 for the info.

MOTION INDUSTRIES:
https://www.motionindustries.com/

Tim Daley(MI)


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]