In Reply to: Re: Another question about my wagner loader rebuild posted by TheOldHokie on April 30, 2020 at 10:08:00:
Thanks again,I was thinking along the same line,there is very little difference between the loader I took off and scraped and this one. Although I think the old one may have been a 130 with only 1 double action cylinder on the bucket, where as this one has 2 and the lift arms were different on this one. This one more resembles the 200,I had to use the lift arms from the one I scraped because one of the legs on this one had been broken and rewelded so I junked it and welded new cylinder tabs on this one to accommodate the 2 cylinders. I saved every useable piece from both in case I needed it.When everything gets here I'll try it without the flow control valve and see what happens. God Bless,Beth and Allen.