[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by Jack - Iowa on October 15, 2019 at 15:19:21 [URL] [DELETE] :

Just finished installing a gasket between the transmission and center housing. Now she will not start!

Has hot spark out of the coil but nothing to any plug. Points, condensor, Rotor, Cap and wires all new in August 2018. Even went to town and got a new rotor and cap with no change! If I manually rotate it to where the rotor is right for a particular plug, place an insulator in the points and use an external wire to trigger it I get a nice spark from that plug. What am I missing?


Follow Ups:

Post a Followup:
Name   : 
E-Mail : 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]