rear end

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by chris eby on December 23, 2018 at 12:34:51 [URL] [DELETE] :

well, a little ambition hit me yesterday.so I decided to start to swap out my cracked rear housing on my 39. found a rear with trumpets on it. but the fender bolts are really rusted in the holes. so, I decided to use the trumpets on my tractor. this brings me to the question, is there anything special to know about, to set up the ring gear and pinion?I have heard to use two trumpet gaskets on each side to compensate for the thinner trumpet castings on the older tractors? apparently the original gaskets for the thinner trumpets were thicker? anything else I need to know? never set up a ford rear. seems like a no brainer,but one never knows.chris




Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]