Re: Drawbar question

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by Tim Daley(MI) on December 10, 2018 at 12:37:36 [URL] [DELETE] :

In Reply to: Re: Drawbar question posted by Doug on December 10, 2018 at 10:40:44:

I'd say if the tag was riveted on, someone did it or it was on some aftermarket part/company. Again, Ford/Dearborn Motors never made a 4-hole drawbar similar to the 11-holer. There were some later Ford drawbars that had only a few holes. Back in 1975 I began working at company where I cut my teeth on NC Machining. We also machined some solid drawbars for Ford Tractor. They were service parts and got shipped to England from us. As solid steel castings, we simply drilled and reamed a set of holes in them and that was it. I recall two different drawbars; one long rectangular and one shorter with a hook on one end. There weren't very many holes in them. I recently saw one on ebay. Also, Dearborn Motors used the familiar diamond logo with their name inside. Was this tag like that? It's also possible it was put on by someone stealing a tag from another implement.

Tim Daley(MI)


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]