Re: 101plow shears, where to buy

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by Tim Daley(MI) on September 28, 2018 at 05:35:25 [URL] [DELETE] :

In Reply to: 101plow shears, where to buy posted by Wayne N Ind. on September 27, 2018 at 19:08:45:

Try OSMUNDSON or PLOWORX. I don't know if either carries the FORD 101 plow shares, but call and ask. Most farm supply outlets should carry the later FORD 101 plow wear parts. OSMUNDSON is listed in our LINKS forum. Gaggle PLOWORX for their info. They bought out the old CRESCENT SHOVEL & PLOW CO. Just to be clear, the Ford 101 Plow sometimes is confused with the Dearborn 10-1 Plow -they are two different animals. The Ford 101 Plow was much later, after the Economy Plows, and parts are still available. It can be ID'd with the trip feature on the moldboards and furrow width adjusting arm. Click on the LINK below for the A&O Manual we have here. The Dearborn Moldboard Plow (Prior Model)was made from 1947 thru 1950, but is no longer serviced, meaning parts not made anymore. The Dearborn Economy Plow followed, 1950-1954, a much better design and wear parts only are still available. In '53/'54 Dearborn was absorbed by the new Ford Tractor Division, but model numbers and parts were still the same, only the ID Tag name changed. The company PLOWORX is now repopping the old Ferguson-Sherman plow points so look for the Dearborn shares to soon follow. Note that there is an error in our MANUALS forum/PLOWS. There is a plow brochure listed as the 101 Plow but it isn't. It is for the Dearborn/Ford Economy Plows. This LINK has the correct FORD 101 Plow manual.

Tim Daley(MI)


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]