In Reply to: Re: 8N Breather Door Clip posted by Tim Daley(MI) on February 17, 2018 at 11:46:45:
Sounds like it. The stud is 1/4X28.
Mine had a spring steel J nut but I would think a cage nut would work. 1/4X28 cage nuts are not available but I could probably put a 1/4X20 in a vise and run a 1/4X28 tap through it to make it work.
So far I have not been able to find a 1/4X20 cage nut available locally but have a couple more places to visit.