Re: Sleeves

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by Ben R on February 10, 2018 at 12:39:29 [URL] [DELETE] :

In Reply to: Re: Sleeves posted by tractorfix on February 10, 2018 at 08:54:33:

I have a 1941 9N with the 0825 pistons in it. I put new rings in it a few years ago and it works & runs very nice,it only sees a few hours of work a year,so it should be good for years to come. My 1952 engine was completely rebuilt back in 96 and the 090 sleeves were rebored to 040 this tractor has been used a fair bit and is still going strong. Prior to 98 I worked at a engine rebuilder so I got the machine shop work done at a very reasonable cost. Today it would probably cost more to have the 090 sleeves bored and honed than to buy a new sleeve piston kit.


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]