Re: Pan Seats

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by Tim Daley(MI) on September 23, 2017 at 11:12:27 [URL] [DELETE] :

In Reply to: Pan Seats posted by Tim Daley(MI) on September 21, 2017 at 18:54:24:

Frequent member here Del Huebner sent me a photo of his 1942 2N riveted design pan seat. We know these facts:

1. The January 2, 1942 MPC lists only the 9N-400-A seat. This MPC is kind of misleading because there is not a single 2N prefixed part listed and was essentially a continuation of the 1941 9N Model. The 2N warhorse had not been built yet. Only a few thousand 9Ns were built in early 1942 prior to the shutdown.

2. On February 10, 1942 ALL car, truck, tractor, and commercial vehicle production ceased at Ford worldwide per the US War Boards' Regulations. Manufacturing was to be only to produce war time ordinance products. Ford wouldn't get back to normal tractor operations until early 1943. The restrictions were imparted on every US manufacturing company, not just Ford.

3. There were no Tractor MPC's for model years, 1943, 1944, and 1945. In 1943 there was a Price Supplement Guide that only listed the 2N War Time model parts: magnetos, steel wheels, etc. In April 1943 the Ford-Ferguson Moto-Tug was released to the US War Department. There was a special MPC for the Tug but those were built from a basic 9N/2N and utilized outside supplied parts which included the special padded seat.

4. The first documented listing for the 9N-400-C, riveted seat was in the January 1946 MPC. I believe the 'C' was released before then though. We need to see the original drawing and verify the Engineering Change Level dates in the EI blocks.

5. The 9N-400-B seat was the optional plastic model offered in 1939 and 1940. Discontinued by 1941 as it was made from soybean polymers and mice, rats, birds, and rodents chewed them up. the 9N-400-D seat was the flip-up design released starting with the 8N in July, 1947.


9N-400-A, SEAT, WELDED ASS'Y:

9N-400-C PAN SEAT; RIVETED:

NOTE: The 9N-400-A pan has 9 vent holes and the 9N-400-C has 7 vent holes.

Tim Daley(MI)


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]