Re: Attaching control valve fork

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by John in Mich on April 24, 2017 at 08:37:33 [URL] [DELETE] :

In Reply to: Re: Attaching control valve fork posted by JMOR on April 23, 2017 at 23:24:55:

If a person did this often it might be handy to have a special tool. My thought is a spreader bar with a slight notch in each end to prevent slipping off and a handle/lever attached in the middle.
Reach in and spread the forks by rotating the tool, align with the manual valve and rotate the tool up or down to close the forks.
Any thoughts?


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]