8n Wirst Pin bushings

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]

Posted by Brian Good on March 03, 2017 at 18:06:44 [URL] [DELETE] :

Help!
Rebuilding the engine on my 8N. The machine shop assembled my rods and pistons. The holes on the sides of the rods do not go through to the wrist pin. The holes on the top line up correctly. I compared it to an old connecting Rod that I had. On the old connecting rod the the holes in the bushing line up and go through. The service training manual says to drill the hole. Looking for direction please!


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ N Board Forum ] [ FAQ ]