Re: Rusty Grader Blade

[ Follow Ups ] [ Post Followup ] [ Implements Forum ] [ FAQ ]

Posted by Douglas Best on October 08, 2017 at 21:02:16 [URL] [DELETE] :

In Reply to: Re: Rusty Grader Blade posted by Ed Gooding (VA) on May 14, 2016 at 21:14:13:

I had a similar problem.i tried penetrating oils and a torch. Finally resorted to pulling on a stump to wiggle the blade loose. The first time I used the blade the pipe which holds the blade broke and the blade separated from the frame. I welded a short piece of pipie for the broken piece of pipe to fit over along with an additional piece of metal to the horizontal pipe and then welded the piece of pipe broken off. It has worked well since being repaired. I would recommend making the shorter round piece Long enough so it would be easier to attach inside by welding, it has to be short enough so you can weld it to the horizontal pipe.

Follow Ups:

Post a Followup:
Name   : 
E-Mail : 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : Link Title : Website Title Optional Image URL:
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!

[ Follow Ups ] [ Post Followup ] [ Implements Forum ] [ FAQ ]