In Reply to: bush hog posted by chris on April 08, 2017 at 21:53:33:
I think that you could run any Category-1, 5-foot bush hog behind your N with few issues.
The two things you need to be aware of are that all modern bush hogs use a 1-3/8" PTO connection and if your N is still factory stock, it will have a 1-1/8" PTO, so you will either have to replace the PTO shaft or buy an adapter. Two, you need to run an Overrun Coupler (ORC) between your PTO gear and bush hog drive shaft. If you can find an ORC that also adapts 1-1/8" male to 1-3/8" female (assuming you have the original PTO shaft) would be ideal.