Belt Pulley

[ Follow Ups ] [ Post Followup ] [ Implements Forum ] [ FAQ ]

Posted by Brian-2N on July 27, 2015 at 09:47:13 [URL] [DELETE] :

Tried searching the archives. From what I gathered, there were two sizes of pulleys, 8" and 9" (not talking about the spline sizes, which I know had two offerings, 1-1/8" & 1-3/8").
Is that correct-were there only two models(sizes)offered?
I picked up a cordwood saw, and it is apparent that the belt pulley I have is too big, as the previous owner cobbed together a stand-off to draw the pulley away from the tractor, using a PTO extension to make it work. If you don't use the stand-off, the pulley strikes the lower lift arms while running.
I found some data sheets that Ed Gooding provided a long time ago, and for the model saw (22-1) it looks like I need an 8" pulley.
Can anyone confirm what I really need for a pulley, and the number of different types that were offered? Thank you.


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ Implements Forum ] [ FAQ ]