Re: Generator bracket and tensioner

[ Follow Ups ] [ Post Followup ] [ Ads Forum ] [ FAQ ]

Posted by Tim Daley(MI) on June 04, 2018 at 14:01:39 [URL] [DELETE] :

In Reply to: Generator bracket and tensioner posted by Wayne Rowland - on June 03, 2018 at 09:03:26:

HiYa Wayne-
OK, I don't know what a '3-cornered one" is but sounds like you don't have an 8N generator or you do and are asking about a 2N or 9N-C genny belt tensioning device. The 9N-10000-C and the 2N-10000 generators are 1-wire/3-brush type units, A circuit deign and both use the round can cutout. They are virtually the same inside and out except the belt tensioner on the 2N was a standard item bolted on and the 9N-C generator had a dealer available kit that used the steel band around the barrel to fasten with. The 8N-10000 A and B, 3-wire/3-brush A circuit type, with a voltage regulator, used on front mount tractors, used a belt tensioning arm, p/n 8N-10145 see MPC, and fastened to the timing cover and genny mount bracket. SEE pictures below. If you have an8N genny and need the belt tensioning arm, I have about a dozen. $15 includes shipping. Email is open.

FORD 9N-10000-C GENERATOR & BELT TENSIONING KIT:

FORD 2N-10000 GENERATOR w/BELT TENSIONING BRACKET OEM:

FORD 8N GENERATOR w/TENSIONING ARM, USED ONLY WITH FRONT MOUNT:


Tim Daley(MI)


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ Ads Forum ] [ FAQ ]