In Reply to: Re: Loader mounting plate posted by Charlie (IN) on April 03, 2017 at 00:34:09:
I don't have a picture. I can't find a PDF of the manual on the internet. The loader is too short to fit a 3000. They made a rectangular plate to extend the loader far enough to bolt to the back axle. It takes 7 inch plow bolts to mount it. The plate is on the web very cheap, but I cannot find the plow bolts anywhere near reasonable.
The plats is approx. 4 in. wide by 8 in. long, by 1/2 in thick.